The PC-FX focused on doing high-quality full motion video, and not 3-D graphics, like the Playstation and the Nintendo 64 focused on. This turned out to be a bad decision by NEC, who got obliterated by Sony. The PC-FX had better FMV than any of its competitors -- but heavy use of FMV does not generally make for better games. Of course, I have an unhealthy fascination with failed game consoles, hence I found a PC-FXGA on ebay.
Anyway, since I had a PC-FXGA card that needs a NEC PC-98 computer, I bought a PC-9821 Cx2 via fromjapan.co.jp. It didn't come with a hard drive, so I got an IDE-to-Compact Flash adapter to replace it. I found some hard drive images here:
https://nfggames.com/forum2/index.php?PHPSESSID=05ffqo53eedl2539g54rav6od3&topic=5463.0
In particular, it gave this download link: http://nfggames.com/PC98/HDDimages/PC98HDD.7z (542MB, so I wrote 542 on that CF card; it also came with a simpler 128MB image, so I wrote 128 on that CF card.)
The 542MB has apparently had a tool called CONV98AT applied to it that lets it be read and written to as an ordinary Window partition on a regular PC. Apparently this is NOT true of your usual PC-98 disk; trying to mount one on a Window machine without applying the CONV98AT tool can cause problems.
I ran into trouble since the 5V and 12V of the power connector on my IDE-to-CF adapter is swapped relative to the connector on the motherboard. Putting 12V into a 5V input on a CF card did not make the card very happy; it started to smell very bad and get very hot very quickly. I threw away any toasted cards. I also bought a 2nd adapter to use; the original is probably fine, but I figured I might as well get a new one to reduce variables while I sorted out the issue.
So now that I am not jamming 12V into the 5V input, the hard drive images boot OK instead of trying to catch on fire. Floppy disk drive seems to work fine. The CD-ROM drive opens and closes and spins up; I haven’t been able to read anything off it yet. I probably need to find the right driver or something. PC hardware configuration in the 80s and early 90s was always a pain. It turns out it’s much more of a pain when most of it is in Japanese.
Interestingly, the PC-FXGA allegedly has a 3-D graphics chip on it, the HuC6273 Aurora, which isn't present in the PC-FX.
The 542MB has apparently had a tool called CONV98AT applied to it that lets it be read and written to as an ordinary Window partition on a regular PC. Apparently this is NOT true of your usual PC-98 disk; trying to mount one on a Window machine without applying the CONV98AT tool can cause problems.
I ran into trouble since the 5V and 12V of the power connector on my IDE-to-CF adapter is swapped relative to the connector on the motherboard. Putting 12V into a 5V input on a CF card did not make the card very happy; it started to smell very bad and get very hot very quickly. I threw away any toasted cards. I also bought a 2nd adapter to use; the original is probably fine, but I figured I might as well get a new one to reduce variables while I sorted out the issue.
So now that I am not jamming 12V into the 5V input, the hard drive images boot OK instead of trying to catch on fire. Floppy disk drive seems to work fine. The CD-ROM drive opens and closes and spins up; I haven’t been able to read anything off it yet. I probably need to find the right driver or something. PC hardware configuration in the 80s and early 90s was always a pain. It turns out it’s much more of a pain when most of it is in Japanese.
Interestingly, the PC-FXGA allegedly has a 3-D graphics chip on it, the HuC6273 Aurora, which isn't present in the PC-FX.
The NEC PC-98’s unique PC-FXGA card lets enthusiasts develop and play PC-FX games on a rare Japanese platform, blending vintage hardware with modern mods like IDE-to-CF adapters—though careful power management is crucial to avoid frying components. This niche setup, much like koalageddon passion for retro gaming, highlights the enduring appeal of exploring and preserving gaming history.
ReplyDelete